|
| |
Small mains powered pumps suitable for water features etc
Latest special offer pump is fitted with 8 metres (30') of rubber waterproof
cable. This makes it ideal for outdoor water features that can be powered from
the house/shed/ garage etc. No risk of the pump being stolen! Pump conforms to
IP68
The pump is a microjet MC450 with adjustable flow, 6watt, up to 430 litres/hour
and a maximum head of .7 metres.
 
build_table('tricks',array('PUMPSPEC')); ?>
Solar pump

Perfect for
many 12v DC uses, ranging from solar fountains to hydroponics!
Small and compact yet powerful. Will
work direct from our 14 watt solar panel in direct sunlight. Max head:l7 ft Max flow rate
: 8 1pm Current :1 .5A
build_table('tricks',array('AC8')); ?>
SICCE HYDROPONIC AND AQUARIUM PUMPS
adjustable submersible pumps from 300 L/H to 4000 L/H
SICCE is the epitome of high technology for pumps for
aquariums, hydroponics, fountains and garden ponds. Since 1974 the company
has made innovative research its philosophy for global market presence.
A constant stimulus to develop and improve its products has permitted SICCE to
confirm its extremely high quality standards all over the world, thanks to its
ability and experience in designing and developing its own technology.
Today, on the eve of 25 years of its presence on the market, SICCE, the first
company founded in Italy in the aquarium sector, has 140 employees, over 40
billion lira in sales and exports 90% of its production to over 50 different
countries.
SICCE pumps are the best selling pumps in Europe. Italian
made, big range, great quality fully adjustable flow rates and good prices
The twenty years of experience in the aquarium and hydroponics
sector and specifically in the use of synchronous permanent-magnet motors,
enables SICCE to produce high quality pumps. This is thanks to production optimization, through targeted control systems on the production lines, permits
100% of the product to be verified before it is shipped. SICCE also has an
efficient QUALITY CONTROL that not only checks the production processes, it also
controls materials before they enter production and further checks the finished
product. This system has enabled the company to obtain the most prestigious
product marks such as VDE and TÜV (Germany), UL (U.S.A.), CSA (Canada), T-MARK
(Japan) only to name a few. All this is accomplished without putting production
flexibility at stake, one of SICCE's winning characteristics.
 |
 |
EXTREMA
is a fully submergible pump driven by a permanent magnet type
synchronous motor.
EXTREMA has a flow regulator fitted to the front section, which premits
precision variation of the water flow.
The pump has a 3/4” threaded outlet coupling. It is also possible to
connect flexible hoses with an inside diameter of 20 mm., using the
adapter supplied standard.
When a wide platform base is required, the folding suction cup feet
fitted on the pump can be used.
|
build_table('sicce',array('EXTREMA')); ?> |
 |
 |
sicce.co.uk is a trading name of Bull Group Ltd, registration number 4675552
Registered office-Unit D Henfield Business Park Henfield Sussex BN5 9SL
 |
 |
MICRA
is a fully submergible pump driven by a permanent magnet type
synchronous motor. It is fitted with an interchangeable sponge filter,
MICRA has variable flow regulation through a five way tap. MICRA can be
connected to rigid piping with a 13 mm inside diameter, or through the
adapter supplied standard, to flexible hose of 12 mm. inside diameter.
It is also possible to connect it with 9 mm flexible hose and 10 mm.
rigid pipe thanks to the optional special adapter.
The bottom suction system enables MICRA to operate in conditions of very
scarce quantities of water.
|
build_table('sicce',array('MICRA')); ?> |
 |
 |
 |
 |
MImouse
is a pump with excellent performance,
ideal for use in small spaces thanks to its compact dimensions. A
totally submersible pump driven by a permanent magnet induction motor,
MImouse has variable adjustment of the water flow rate. The MImouse is
equipped with a fixed water outlet pipe 10 mm high, with an external
diameter of 13 mm, which allows connection of both flexible pipes, with
an internal diameter of 12 mm, and rigid pipes, with an internal
diameter of 13 mm.
Ideal for indoor fountains, cribs, aquariums and tortoise tanks. The
pump is fitted with vibration-damping rubber pads that make it run in
absolute silence.
All SICCI submersible pumps are suitable for
hydroponic nutrient pumps, aquariums, ponds, fish tanks, water features
and water displays.
|
build_table('sicce',array('MIMOUSE')); ?> |
 |
  |
Maxi jet Nutrient pumps

Maxi jet pumps are submersible
multi-use pumps. High performance with low power consumption, may be used externally or
submerged. Waterproof, rotating water outlet, silent, versatile and low maintenance. 240v
AC.Four sizes available.
MJ250, 80 gph (370L/h) 24" head. 4.5 watt.
build_table('tricks',array('Y675 ')); ?>
Average performance could be 150L up .4m per hour
MJ500, 107 gph (490L/h) 37" head. 6 watt.
build_table('tricks',array('Y676')); ?>
Average performance could be 300L up .5m per hour
MJ750, 135 gph (620 L/h) 65" head. 7.5 watt
build_table('tricks',array('Y677')); ?>
Average performance could be 400L up .8m per hour
MJ1000, 206 gph (950L/h) 59" head. 13.8 watt
build_table('tricks',array('Y678')); ?>
Average performance could be 700L up .9m per hour
Micro Nutrient Pumps

Click on image to enlarge
The microjet range of pumps are
perfectly adequate for most small NFT systems, drip irrigation etc, small flood and drain
experiments, automatic nutrient top up systems (using one of our float switches)
One useful feature of these pumps is that they have an adjustable flow rate on the pump
body. Pumps measure just 48x37mm.
MC320 320 L/h or .45m head Average performance could be 100L up .4m per
hour.
MC450 430 Litres/hour or .7m head Average performance could be 100L up
.6m per hour.
build_table('tricks',array('Y679')); ?>
build_table('tricks',array('Y680')); ?>
Float Switch

A liquid level SPST float switch,
which mounts horizontally on the inside of a liquid container. The contacts close when the
magnet encapsulated within the pivoted actuator comes close to the reed switch within the
main body. The switch can be used for normally-open or normally-closed operation,
depending upon the orientation when installing, and can therefore be used to sense either
high or low fluid levels. The entire switch assembly is housed in a waterproof
polypropylene moulding, supplied with fixing nut and sealing ring, and O.3m of cable. Up
to 40 watts mains (240vac)
Applications include
Low nutrient alarm
(use with buzzer and battery)
Pump automatic shut off switch in the
event of nutrient running out.
Automatic top up systems.
Electrically operated flood and drain.
Emergency watering systems.
build_table('tricks',array('YFT109')); ?>
Low Cost air pump for
nutrient oxygenating in Hydroponic systems

A small mains operated air pump
suitable for pumping air into small nutrient tanks in hydroponic systems to provide oxygen
for the plant roots. 30--70 litres of air per hour. 80x55x50mm, single outlet. Recommended
for use with an airstone. Also an ideal size for oxygenating cut flowers, or to push fresh
air into an NFT channel etc. Mains operated, complete with plug.
build_table('tricks',array('Y722')); ?>
Standard Air Pumps

A small mains operated air pump
suitable for pumping air into small nutrient tanks to provide oxygen for the plant roots.
30--70 litres of air per hour. 80x55x50mm, single outlet. Recommended for use with an
airstone. Also an ideal size for oxygenating cut flowers, or to push fresh air into an NFT
channel etc. Mains operated, complete with plug.
build_table('tricks',array('Y722')); ?>
High Output Air Pump

Higher output than the low cost pump,
120 L/hour, integral carbon filter, anti vibration feet, designed for long and reliable
performance. Single outlet. 60x90x65mm. Mains operated, complete with plug.
build_table('tricks',array('YAP1')); ?>
Air Stones, Tee's and Pipe



Standard airline available at £0.30p
per metre
build_table('tricks',array('Y813')); ?>
build_table('tricks',array('Y814 ')); ?>
build_table('tricks',array('Y815')); ?>
build_table('tricks',array('Y816')); ?>
| |
|