THE NEW "ONE PROBE" MILWAUKEE METER

MILWAUKEE SM802 PROFESSIONAL 3-IN-1 INSTRUMENT YOU CAN MEASURE pH, EC AND TDS AT THE SAME TIME 

This Smart combined portable meter is extremely suitable for any multi-use and is especially designed for quick measurements.

The instrument is supplied complete with combination electrode, a 9V battery, instruction manual and a sachet with calibration solution for pH and Conductivity.

MILWAUKEE PH51 WATERPROOF PH TESTER

Milwaukee's BLUE range of waterproof testers supercedes the IP97 range and represents the NEW WAVE of pocket-sized pH, Conductivity & TDS meters. These waterproof testers incorporate one of the WORLD'S FIRST user-replaceable electrodes to increase the LONGLIVITY of the instruments. These light-weight testers are built for RUGGED use and WET APPLICATIONS. The waterproof pH tester comes with a 2 point manual procedure for direct calibration to eliminate the difficult push button system used with other meters in the waterproof range. 

• Accuracy    +/- 0.1pH

• Resolution    o.1pH

• ATC    No

• Range    0.0-14.00pH

• Electrode    Replaceable   

MILWAUKEE SMART EC MONITOR SMS310

The SMS310 Smart Conductivity Monitor is designed to continuously monitor conductivity values directly in your reservoir. The SMS310 is usually mounted on the wall with the probe immersed in the nutrient reservoir.

• Range 0.0-10.0 mS/cm

• Resolution    0.1mS/cm

• Accuracy Manual 1 point

• Set point range    1.5-3.5mS

• Alarm    Active when reading is lower than set point

• Power Supply 12vdc adapter (optional)

• Electrode    MA811/2

• Dimensions 80 x145 x 35mm

Milwalkee Sharp pH tester ph40

The Sharp testers are microprocessor controlled, automatic calibration, rugged one piece splash proof casing.

• Range    0.0 to 14pH

• Resolution    0.1 pH

• Accuracy    +/- 0.2pH

• Calibration    automatic

• Battery life    300 hours

• Environment    0-50 deg C  95% RH Max

• Dimensions    150 x 45 x25mm

Milwalkee T71 Sharp TDS conductivity tester

Automatic temperature compensation, stainless steel sensor housing

• Range    0 - 1999 ppm

• Resolution    1ppm

• Accuraccy    +/- 2% FSD

• Calibration    Manual 1 point

• Temperature compensation    automatic 5-50 deg C

• Battery life    350 hours

CF and pH meters

Two good quality meters made by Eutech Cybernetics.

pH scan 1 Microprocessor based pocket pH tester measuring 153x42x23mm.
Measures from 1.0 to 15.0 pH with an accuracy of +/- 0.2 pH. Easy to read digital display, up to 70 hours use from internal batteries (Ever ready EP675E) automatic power off, operating temperature 0-50 deg C. 90 gram weight.

Digital Light Meter

A useful addition to any growing environment will be this digital light meter. Perfect for setting up lights, experimenting with reflected light, making the best use of ambient light, etc.
A hand~heId digital light meter for indicating light intensities in lux. 4 selectable ranges: 20, 200, 2000 and 20,000 lux. Display hold, 3.5 digit liquid crystal display. Power 9Vdc IPP3),Weight 250g Dimensions: Photosensor 100 x 60 x 27mm, Meter     135 x 72 x 33mm

pH Pro Tester

pH Pro pocket tester features state of-the-art electronics,together with a large, easy to read 8mm, 31/2 digit liquid crystal display. The pH Pro utilises a glass measuring electrode, in conjunction with the reference electrode and two point calibration, to provide a guaranteed accuracy of +/- O.O5pH. The pocket tester measures over the range of 0 to 14 pH, with a resolution of 0.01 pH, and an accuracy of +/-0.05 pH. The readings are automatically compensated over the operating range of 0 deg C to 70 deg C.

TDS Tester

These easy to use IDS pocket testers provide the ideal solution for measuring ppm or umho The pocket tester is suitable for monitoring a variety of applications including, the amount of salts or dissolved solids in water. Range 19,000 umho, 100 umho reading.
TDS4

C F Truncheon

State of the art conductivity 'truncheon' from Hydroponics International (New Zealand). 2 year guarantee. Professional grade Ce meter designed for commercial use. 40cm long with carrying strap (not shown).

Thermo-Hygrometer with Memory

A useful instrument with a dual LCD display showing both indoor and outdoor temperatures via an external sensor, together with a memory function to record the highest and lowest external temperatures. Indoor relative humidity (RH) is displayed on the upper LCD, expressed as a percentage. Temperature range: Indoor: 0 deg C to 50 deg C, outdoor -50 deg C to 70 deg C, indoor RH range 25%-95% @ 25 deg C, 3vdc, 2 x AA batteries req'd, sensor length 3 m, 154x82x20.5mm, weight 140gms.
       

Tele Sales 0870 770 7520